What 26.4.13 Changes
Release 26.4.13 gives device model policy a time-based network control and adds two diagnostic values to Apple device details. The network control is off by default and only applies above a defined threshold.
Key Changes
- Device model policy gains automatic network disable. Enter 0 to turn this feature off. The minimum setting is 6 hours; if a value below 6 hours is entered, the front end clears it automatically, and the value must be greater than 6 hours to take effect.
- Apple device details now show PAC request time and PAC request IP. These two values appear only on plus+ devices with global proxy enabled.
Scope and Verification
Applies to PC Console version 26.4.13 and later. After upgrading, open device model policy and test the new field: confirm 0 disables it, that a sub-6-hour value is cleared, and that a value above 6 hours is retained. On an Apple device with global proxy enabled, open the details page and confirm the PAC request time and PAC request IP are displayed; on other devices they should stay hidden. Final scope is subject to the confirmed product specification and service agreement.
