MDM 26.8.21: Anti-Bypass Lock Mode for Apple Devices

Changelog 2026-11-10 Views 0

Version 26.8.21 adds a protection mode designed to reduce bypass risk on Apple devices. It can be toggled manually on a single device or applied in bulk through device model policy, and the control is available on both the PC Console and the Mobile Mini Program.

New Anti-Bypass Lock switch

  • Apple device details now include an 'Anti-Bypass Lock' (Anti-Bypass Lock 2.0) switch.
  • PC Console entry: the Device Operations area on the right side of the Apple device detail page.
  • Mobile Mini Program entry: Device Details > Device Control dialog.

Two ways to apply it

  • Manual control: turn the switch on or off for an individual device from its detail page.
  • Bulk control: configure the same option through device model policy so a group of devices inherits the setting.

Scope and verification

The feature applies to Apple devices and requires access to the device detail page on either the PC Console or the Mini Program. Because the two ends stay in sync, a change made in one place is reflected in the other. To verify, open one Apple device on the PC Console, enable the switch, then confirm the same state in the Mini Program dialog; for bulk setup, apply it to one model and check an enrolled device. This mode is designed to help reduce bypass risk and does not by itself guarantee protection against every method. The final scope is subject to the confirmed product specification and service agreement.

Email 400 816 5855